Loading... Please wait...
  • Image 1

Flexim Fixed Ultrasonic Flowmeter ADM-7407 for Liquids and Gases with 4-20 Pulse, Modbus and Data

5.00 LBS

Product Description



Ultrasonic Flowmeter - Whether it is for liquids or gas, from small to large pipes, low to extreme temperatures (750 degF) whether it is volume, mass, thermal energy or concentration, FLEXIM has a solution for the most difficult of metering applications.


  • Part number ADM 7407
  • Manufactured by FLEXIM
  • FLOW Measurements - Better than 1% Reading with Laboratory Traceablility!
  • High Temperature Accuracy to .03 deg C with NIST Traceability and Temperature Match!
  • High Turndown - 0.01 to 80 ft/sec, 8000 to 1 !
  • NO Contractors- Transit Time Technology installs on existing pipe, Minimal installation cost!
  • Extreme Temperature - Standard unit -20 to 270 deg F. Others from -300 to 800 deg F.


The ADM 7407 Clamp On Flow Meter is designed to withstand harsh, rugged environments. Stainless steel encloses the transducers and the transducer cable; it is also used for the mounting fixture. The transducers are hermetically sealed - there are no weak connection points. The flow computer is enclosed in a robust metal housing, making the clamp on flow meter completely water tight (IP65/67).

Due to its matched and paired transducers as well as temperature compensation (complying with ANSI/ASME regulations), the clamp on flow meter reads zero from the outset, and holds zero for the lifetime of the measurement. Dual microprocessors provide advanced signal evaluation at an extremely high number of measuring cycles per second (up to 1000Hz). All of this means the clamp on flow meter produces stable, reliable flow metering, even under dynamic and difficult conditions.

Using ultrasonic gel to couple the transducers to the pipe is a thing of the past - the transducers can now use an everlasting Viton pad, meaning there is literally no maintenance requirements!

Clamp On Flow Meters are ideal for chemically agressive or toxic fluids - with the measurement being completely non-invasive, there is no chance of leakage.

The Flexim FLUXUS ADM 7407 clamp on flow meter is completely configurable with a wide range of electrical outputs and inputs. Parameters such as temperature, pressure, RPM etc can all be connected into the flow computer, for further calculations such as thermal energy flow, mass flow and density. Process outputs include 4-20mA, relay, Modbus RTU and HART.

The FLUXUS ADM 7407 clamp on flow meter is also available in an IECEX Zone 2 version, for use in hazardous areas. FLEXIM also offers liquid flow meters for usage in IECEX Zone 1 environments, such as the FLUXUS ADM 2027 and FLUXUS ADM 8127 (for Offshore usage).

Aquip have a team of qualified service engineers available to assist with installation, troubleshooting etc, contact us now.

Product Videos

Flexim Coax -How To Guide (04:31)
  • Flexim Coax -How To Guide

This product hasn't received any reviews yet. Be the first to review this product!

Write your own product review


Recent Updates

Sign up to our newsletter