9202A	9202B

9202A

Advanced features

• Configuration and monitoring by way of detachable display front (PR 4511/4501).
• Selection of direct or inverted function for each channel via PR 4511/4501.
• Advanced monitoring of internal communication and stored data.
• Optional redundant supply via power rail and/ or separate supply.
• SIL 2 functionality is optional and must be activated in a menu point.

Application

• The device can be mounted in and receive signals from non-classified area and zone 2.
• Pulse isolator for transmission of signals from NAMUR sensors and mechanical switches.
• Monitoring of error events and cable breakage via the individual status relay and/or a collective electronic signal via the power rail.
• The 9202A has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508.

Technical characteristics

• 1 green and 2 yellow/red front LEDs indicate operation status and malfunction.
• 2.6 kVAC galvanic isolation between input, output and supply.
• • Interface for NAMUR sensors and switches
  • Extended self-diagnostics and detection of cable fault
  • 1 or 2 channels
  • Can be supplied separately or installed on power rail, PR type 9400
  • SIL 2-certified via Full Assessment

Mounting

• The devices can be mounted vertically or horizontally without distance between neighbouring units.

9202B

Advanced features

• Configuration and monitoring by way of detachable display front (PR 4501).
• Selection of direct or inverted function for each channel via PR 4501.
• Advanced monitoring of internal communication and stored data.
• Optional redundant supply via power rail and/ or separate supply.
• SIL 2 functionality is optional and must be activated in a menu point.

Application

• 9202B can be mounted in the safe area or in zone 2 / Cl. 1 div. 2 and receive signals from zone 0, 1, 2 and zone 20, 21, 22 including mining / Class I/II/III, Div. 1, Gr. A-G.
• Pulse isolator for transmission of signals to the safe area from NAMUR sensors and mechanical switches installed in the hazardous area.
• Monitoring of error events and cable breakage via the individual status relay and/or a collective electronic signal via the power rail.
• The 9202B has been designed, developed and certified for use in SIL 2 applications according to the requirements of IEC 61508.

Technical characteristics

• 1 green and 2 yellow/red front LEDs indicate operation status and malfunction.
• 2.6 kVAC galvanic isolation between input, output and supply.
• 
  
  • Interface for NAMUR sensors and switches
  • Extended self-diagnostics and detection of cable fault
  • 1 or 2 channels
  • Can be supplied separately or installed on power rail, PR type 9400
  • SIL 2-certified via Full Assessment

Mounting

• The devices can be mounted vertically or horizontally without distance between neighbouring units.