Literature

General Desc.

• Input for RTD, TC, mV, linear resistance, mA, and V
• 3-port 3.75 kVAC galvanic isolation
• Current and voltage output
• Universal voltage supply
• 1- and 2-channel versions
• Loop supply > 17.1 V in Ex / I.S. zone 0

Advanced features

• The 5114 transmitter can be configured, with or without a power supply, using the PReset  software and the Loop Link communications unit.

Application

• Jumper selectable inputs for current/voltage or temperature.
• Programmable current (0...100 mA) and voltage (0...250 VDC) inputs.
• Linearized, electronic temperature measurement.
• Conversion of linear resistance variation e.g, from solenoids and butterfly valves or linear movements with attached potentiometer.
• 17.1 VDC loop and 2.5 VDC potentiometer supplies.
• Automatic 4- / 3-wire or programmable 2-wire cable compensation.
• Configurable sensor error detection including NAMUR NE43.

Technical characteristics

• Active or Passive current output and selectable voltage output.
• Separation of circuits in PELV/SELV installations.
• I.S. barrier for temperature sensors, potentiometers, and current / voltage signals.
• I.S. barrier with I.S. power supply for 2-wire transmitters in zone 0, 1, 2, 20, 21 and 2.